# **********************************************************************
# ********* HIGH AVAILABILITY CLUSTER CONFIGURATION FILE ***************
# ***** For complete details about cluster parameters and how to ****
# ***** set them, consult the cmquerycl(1m) manpage or your manual. ****
# **********************************************************************
# Enter a name for this cluster. This name will be used to identify the
# cluster when viewing or manipulating it.
CLUSTER_NAME lpcluster
# Cluster Lock Device Parameters. This is the volume group that
# holds the cluster lock which is used to break a cluster formation
# tie. This volume group should not be used by any other cluster
# as cluster lock device.
FIRST_CLUSTER_LOCK_VG /dev/vg01
# Definition of nodes in the cluster.
# Repeat node definitions as necessary for additional nodes.
NODE_NAME ftsys9
NETWORK_INTERFACE lan0
HEARTBEAT_IP 15.13.171.32
NETWORK_INTERFACE lan3
HEARTBEAT_IP 192.6.7.3
NETWORK_INTERFACE lan4
NETWORK_INTERFACE lan1
HEARTBEAT_IP 192.6.143.10
FIRST_CLUSTER_LOCK_PV /dev/dsk/c1t2d0
# List of serial device file names
# For example:
# SERIAL_DEVICE_FILE /dev/tty0p0
# Primary Network Interfaces on Bridged Net 1: lan0.
# Warning: There are no standby network interfaces on bridged net 1.
# Primary Network Interfaces on Bridged Net 2: lan3.
# Possible standby Network Interfaces on Bridged Net 2: lan4.
# Primary Network Interfaces on Bridged Net 3: lan1.
# Warning: There are no standby network interfaces on bridged net 3.
# Cluster Timing Parameters (microseconds).
# The NODE_TIMEOUT parameter defaults to 2000000 (2 seconds).
# This default setting yields the fastest cluster reformations.
# However, the use of the default value increases the potential
# for spurious reformations due to momentary system hangs or
# network load spikes.
# For a significant portion of installations, a setting of
# 5000000 to 8000000 (5 to 8 seconds) is more appropriate.
# The maximum recommended value for NODE_TIMEOUT is 3000000
# (30 seconds).
HEARTBEAT_INTERVAL 1000000
NODE_TIMEOUT 2000000
# Configuration/Reconfiguration Timing Parameters (microseconds).
AUTO_START_TIMEOUT 600000000
NETWORK_POLLING_INTERVAL 2000000
# Package Configuration Parameters.
# Enter the maximum number of packages which will be configured in the cluster.
# You can not add packages beyond this limit.
# This parameter is required.
MAX_CONFIGURED_PACKAGES 10
# List of cluster aware Volume Groups. These volume groups
# will be used by clustered applications via the vgchange -a e command.
# For example:
# VOLUME_GROUP /dev/vgdatabase
# VOLUME_GROUP /dev/vg02
VOLUME_GROUP /dev/vg01
VOLUME_GROUP /dev/vg02
# List of OPS Volume Groups.# Formerly known as DLM Volume Groups, these volume groups
# will be used by OPS cluster applications via
# the vgchange -a s command.(Note:the name DLM_VOLUME_GROUP
# is also still supported for compatibility with earlier versions.)
# For example:
# OPS_VOLUME GROUP /dev/vgdatabase.
# OPS_VOLUME_GROUP /dev/vg02.
OPS_VOLUME_GROUP /dev/vg_ops
|
打印版本
