 |
» |
|
|
|
下列為HP-UX 11i 1.6 版安裝期間可能會出現的訊息。 swinstall.log檔案警告訊息 | |
HP-UX 11i
1.6 版冷安裝會在 /var/adm/sw/swinstall.log 檔案內寫入一個所有 HP-UX
11i 1.6 版 OE安裝作業常見的警告訊息。訊息如下： * Beginning Selection * "gold15:/": This target does not exist and will be created.WARNING: The software specified contains a kernel fileset.
It will be necessary to reconfigure and reboot the system to
make the kernel software functional. 因為安裝的產品包括核心物件 (核心檔案組)，您需要產生一個新的核心，否則便會出現此警告訊息。 CDE
DesktopConfig.LITECONFIG警告訊息 | |
在安裝作業的配置(swconfig)階段，一或多個警告訊息可能會寫入
/var/adm/sw/swconfig.log
檔案內。 WARNING: The software specification "CDE-ChineseS" refers to a bundle (or to a product, subproduct or fileset within a bundle). Only some of the software specified could be selected. The messages below show those items which could not be selected and those items which were selected but generated a warning: * Could not apply the software selection "DesktopConfig.LITECONFIG,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". |
因為安裝作業選取階段排除DesktopConfig.LITECONFIG (因為與
HPUXBaseOS
隨附軟體內的其他產品專屬互斥)，所以產生此訊息。由於該產品排除在安裝作業之外，但它是
CDE 隨附軟體的一部份，所以在配置期間選擇產品時便產生這些警告訊息。各種不同的軟體規格都可能會發生此類警告訊息。 這類訊息僅屬資訊性質且無需採取任何行動。 OpenGLDevKit.OPENGL-xxx警告訊息 | |
在安裝作業的配置(swconfig)階段，一或多個警告訊息可能會寫入
/var/adm/sw/swconfig.log
檔案內。 WARNING: The software specification "HPUX11i-TCOE" refers to a bundle (or to a product, subproduct or fileset within a bundle). Only some of the software specified could be selected. The messages below show those items which could not be selected and those items which were selected but generated a warning: * Could not apply the software selection "OpenGLDevKit.OPENGL-64-CTRB,r=B.11.22.01,a=HP-UX_B.11.22_PA,v=HP";it is not available from depot or root "gold15:/". * Could not apply the software selection "OpenGLDevKit.OPENGL-64-EXPL,r=B.11.22.01,a=HP-UX_B.11.22_PA,v=HP";it is not available from depot or root "gold15:/".... |
安裝作業不選擇OpenGLDevKit是因為它僅適用於PA-RISC，且不會安裝在以Itanium為基礎的系統上。由於未在安裝作業時選擇它，但它又是
HPUX11i-MTOE與HPUX11i-TCOE隨附軟體的一部份，因此在配置(swconfig)期間選擇產品時便產生此警告訊息。可能會產生多個此訊息第二部份，每一個皆為以OpenGLDevKit.OPENGL
開頭的各種軟體選項。 這類訊息僅屬資訊性質且無需採取任何行動。 無法使用SW-GETTOOLS軟體選項 | |
在安裝作業的配置(swconfig)階段，一或多個警告訊息可能會寫入
/var/adm/sw/swconfig.log
檔案內。 WARNING: The software specification "HPUXBaseAux" refers to a bundle (or to a product, subproduct or fileset within a bundle). Only some of the software specified could be selected. The messages below show those items which could not be selected and those items which were selected but generated a warning: * Could not apply the software selection "SW-GETTOOLS.PRE-UPDATE,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". * Could not apply the software selection "SW-GETTOOLS.SD-SUPPORT,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". * Could not apply the software selection "SW-GETTOOLS.SD2-SUPPORT,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". |
安裝 SW-GETTOOLS 產品為更新工具組的一部份，但HP-UX 11i 1.6
版 (B.11.22版)並不支援此產品。冷安裝期間未選擇安裝此產品，因此產生此警告訊息。 這類訊息僅屬資訊性質且無需採取任何行動。 廢除產品警告訊息 | |
在安裝作業的配置(swconfig)階段，一或多個警告訊息可能會寫入
/var/adm/sw/swconfig.log
檔案內。 WARNING: The software specification "HPUXBaseOS" refers to a bundle (or to a product, subproduct or fileset within a bundle). Only some of the software specified could be selected. The messages below show those items which could not be selected and those items which were selected but generated a warning: * Could not apply the software selection "Obsolete.DISKLESS,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". * Could not apply the software selection "Obsolete.INSTANTIGNITE,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". |
若系統更新至下一個版本，且用來移除系統中廢除的產品時，才會安裝標題為「Obsolete.XYZ」的軟體選項。在冷安裝期間因無廢除版產品可供移除，便會排除這些軟體選項而產生一個警告訊息。 這類訊息僅屬資訊性質且無需採取任何行動。 VxVM
警告訊息 | |
install.log 檔案可能包括下列訊息： * Configure_Disks: Begin
* Will install B.11.22 onto this system.
* Starting VxVM
* Creating VxVM Disk "c2t1d0s2" (0/18/1/0/0.0.1.0).
* Adding disk "c2t1d0s2" to rootdg.
* Enabling VxVM
07/25 18:20:01: vxvm:vxconfigd: WARNING: File
/etc/vx/array.info doesn't exist.
Generating file /etc/vx/array.info. 這類訊息無需採取任何行動，該日誌檔位於： /var/opt/ignite/local/install.log |
可列印版本
